/  en
819 846-3224

Equipment

cintrage

Roll bending
Roll diameter of 6” X 5’ 0”

  • Roll capacity, diameter of 6 1/4” minimum
  • For 1/16″ thickness; maximum length of 5′ 0″
  • For 1/8″ thickness; maximum length of 5′ 0″
  • For 1/4″ thickness; maximum length of 2′ 6″
  • For 5/16″ thickness; maximum length of 2′ 0″
cintrage
scie-a-ruban

Band saw

We have 5 band saws of different dimensions, including some with automatic feed.

Our maximum cutting capacity is 27″ in width and 18″ in height.

poinconnage_geka

Punch Geka

75-ton punch

  • Thickness capacity for plates from 1/16″ to 3/4″
  • Diameter of holes: from 3/16″, to 1 1/8″
  • Throat of this machine: 11 7/8″

165-ton punch

  • Thickness capacity for plates from1/16″ to 1 1/4″
  • Diameter of holes: from 3/16″, to 1 1/2″
  • Throat of this machine: 15 1/2″
  • Semy-Paxy system: 15 1/2″ X 40″
  • nc1 and dxf files
poinconnage_geka
angle-master

Angle Master AFPS 643Q

  • Marking punch system (letter height = 1/2″)
  •  Capacity:
    – Flat bar: from 2″ X 1/4″ minimum to 6″ X 5/8″ maximum
    – Iron angle: from 1 1/2″ X 1 1/2″ X 1/8″ minimum to 6″ X 6″ X 5/8″ maximum
  • Holes Diameter : from 1/4″ to 1 1/2″
  • Maximum length: 40′ 0″
  • nc1 file
drill-line

Drill-line Peddinghaus PCD1100/B

  • Scribing marking system
  • Available steel profiles with capacities:
    – Flat bar 3/4″ X 3″ to 12″
    – Channel 3″ to 18″
    – Iron angle: 3″ to 9″
    – H and I beam: 3″ to 27″
    – Tube (HSS) 3″ to 16″
    – Pipe not available
  • Maximum length: 65′ 0″
  • Holes Diameter: 3/8″-7/16″-1/2″-9/16″-5/8″-11/16″-3/4″-13/16″-7/8″-15/16″-1″-1 1/16″-1 5/16″
  • With saw: maximum of 27″
  • nc1 file
drill-line
cisaille

Shear AccurShear

  • Cutting thicknesses available:
    – Steel, from 20 gauge to 3/8″ thick
    – Stainless steel, from 20 gauge to 1/4″ thick
    – Aluminum, from 20 gauge to 1/2″ thick
  • Maximum cutting length of 10′ 0″
machine-a-decouper

Flame Cut Esab Sabre-DXG 5000

  • Size of the cutting table: 14′ 0″ x 40′ 0″
  • Plasma and oxy-fuel cutting
  • Plasma capacity
    – Steel, from 16 gauge to 1 1/4″ thick
    – Aluminum, from 16 gauge to 1/2″ thick
    – Stainless steel, from 16 gauge to 1/4″ thick
  • Oxy-fuel capacity
    – 1/2″ to 6″
  • dxf or dwg file
machine-a-decouper
soudeuse-a-goujon

Stud welder

  • Diameter of studs: from 3/8″ to 1″
  • Length of up to 12″
angle-master_1

Overhead cranes

Our shop is equipped with 20 overhead cranes – from 2 to 15 tons – that enable the manipulation of pieces in a fast and safe manner.

angle-master_1
chariot-elevateur

Lift trucks

8 lift trucks with a capacity of between 2 000 lbs. to 16 000 lbs.

presse-plieuse

Press brake 

Ermaksan Speed Bend

  • Capacity of 220 tons X 12′ 0″
  • 4 axes

Allsteel

  • Capacity of 300 tons X 16′ 0″
  • Traditional
presse-plieuse
peddiwriter

Peddiwriter Peddinghaus PW-1250

Scribing machine to position structural connections

Available steel profiles with capacities

  • H and I beam from 3″ to 27″
    – Minimum inside distance : 1 1/2″
    – Ends distance : 1/2″
    – Top and bottom distance : 1/2″
  • Square and Rectangular Tubing (Hss) from 2 1/2″ to 16″
    – Ends distance : 1/2″
    – Top and bottom distance : 1/2″
  • Angles from 3″ à 9″
    – Minimum inside distance : 1 1/2″
    – Ends distance : 1/2″
    – Top and bottom distance : 1/2″
  • Channel from 3″ to 18″
    – Minimum inside distance : 1 1/2″
    – Ends distance : 1/2″
    – Top and bottom distance : 1/2″
  • Pipe not available
  • Flat bar not available
  • Maximum lenght 65′-0″
  • nc1 or tekla files